诚信为本:市场永远在变,诚信永远不变。

新闻资讯

当前位置: 首页 > 新闻资讯

铜钟的保养办法

发布时间:2022-06-13 09:45:42点击量:

铜钟属于铜制物品,在日常生活中铜钟是很少见得,但是在一些寺庙中确实常见的摆件之一,下面大型铜钟厂家为您介绍铜钟的保养办法。

Copper clocks are made of copper. Copper clocks are rare in daily life, but they are one of the common ornaments in some temples. The following large copper clock manufacturers will introduce the maintenance methods of copper clocks.


1-220613094H5C5.jpg


1.放置铸铜铜钟的房屋必须保持干燥,没有尘埃和空气污染物。温度在18℃-24℃,相对湿度在40%-50%。

1. the house where the cast copper bell is placed must be kept dry and free of dust and air pollutants. The temperature is 18 ℃ -24 ℃, and the relative humidity is 40%-50%.


1-220613094J4S8.jpg


2.必须预防接触铸铜铜钟产生的有害化学作用物质,如酸类、油脂、氯化物等。搬动铜雕一定要戴上棉丝手套,不可用手直接接触,以避免被手上的汗腐蚀。也不可用油污的纸或盒子来包装。

2. it is necessary to prevent contact with harmful chemical substances produced by cast copper bell, such as acids, grease, chlorides, etc. When moving the bronze carving, you must wear cotton gloves. You can't touch it directly with your hands to avoid being corroded by the sweat on your hands. Also do not use greasy paper or box to pack.


1-220613094K21J.jpg


3.铸铜铜钟上的尘埃,要用干净而柔软的布片揩去,而那些需要特别小心的细节(易断、易损),要用柔软的毛刷刷去或用吸尘器吸走或是吹去尘埃。

3. the dust on the cast copper bell should be wiped off with a clean and soft cloth, and the details that need special care (easy to break and wear) should be brushed off with a soft brush, sucked off with a vacuum cleaner or blown off.


1-220613094P2591.jpg


4.必须预防铸铜铜钟受到机械性损坏,相互间不应该彼此碰撞、不要叠压码放、对于细工精制和容易损坏的铸铜雕塑,更加要小心维护。

4. cast copper clocks must be prevented from mechanical damage. They should not collide with each other and should not be stacked. Cast copper sculptures that are refined and easy to be damaged should be carefully maintained.


1-220613094Q0A3.jpg


5.铸铜铜钟摆放时间过长之后,依据摆放的环境或多或少会出现一些暗哑的现象,这个时候可以用棉丝质的细布轻轻来回擦拭,可达到抛光的效果,从而让表面的保护蜡层重新焕发光彩。

5. after the cast copper bell is placed for a long time, some dull phenomenon will appear more or less according to the placing environment. At this time, you can gently wipe it back and forth with a cotton fine cloth to achieve the polishing effect, so as to make the protective wax layer on the surface glow again.


1-220613094R2145.jpg


铸铜铜钟主要表现了造型、质感、纹饰的美,多用于表现神秘有威慑力的宗教题材。铸铜铜钟的制作一般都要经过金属冶炼、锻造、雕刻、镀金、磨光、上红等几个重要的工序。工序比较复杂,工艺也十分考究。

The cast copper bell mainly shows the beauty of shape, texture and decoration, and is mostly used to show mysterious and deterrent religious themes. The manufacture of cast copper bell usually goes through several important processes, such as metal smelting, forging, carving, gold plating, polishing, red painting, etc. The process is quite complicated and the process is also very exquisite.